Odor Suction - Anycubic Photon Mono SQ (Absaugung)
Description
This piece is set between the hood and the printer. Some holes in the front let the fresh air into the printer, so that the fan can blow out the smelling odor out of the backside. An external 80mm fan is needed (distances between screw holes are 71,5mm). I've used the "Xilence XPF80.W 80mm" which fits perfectly. Your can screw the fan directly onto the big hole, and after the fan you can use your own solution. I've used a nice hose connector from this thing: https://www.thingiverse.com/thing:5442710 (the "anyc_csonk.stl") You can connect a flexible 100mm flexible pvc pipe to it. You need a bigger printer for this project: 273mm x 223mm. On the photos you see my first try without
Statistics
Likes
0
Downloads
0