FT817 FT818 Support Legs
Description
This radio's display is difficult to see when flat on a desk - so these legs lift it up to a good angle for visibility. They fold flat for storage. The brackets are the same front and rear with L and R versions and the front and back legs are both the same - so you need to print 2x each of the STL files. I used M4 bolts (16-18mm) and locking hexagonal nuts to fix the legs to the bracket with a washer between leg and bracket to help it rotate. The brackets fix to the radio by removing the side brackets and screws and replacing them with M2.5 hex head machine screws (12mm). Screw lengths can be adjusted by filing out the brackets if necessary.
Statistics
Likes
0
Downloads
0