MasterSpool with recycled Longer spool!
Description
This is a MasterSpool compatible with **recycled Longer spool**! The material needed is **only 156g** of filament and a old Longer spool for the universal hole! Less than the original masterspool of **500g**. Just need to cut in half the old spool (with a 2mm saw for me), but you can cut more, like 10mm if you can't cut straight across, thinking the 2 parts need to rotate when you close the spool! Print the "standard" hole with the 3 parts : - masterspool big hole Longer 62mm mal.stl - masterspool big hole Longer 62mm fem.stl - masterspool longer ring.stl I've done first a version compatible with Ikea dry box ! Start with [@crashdebug wheel](https://www.thingiverse.com/thing:4682691). Material needed is **only 172g** Print with 3 parts : - masterspool 8mm hole Longer mal.stl - masterspool 8mm hole Longer fem.stl - masterspool longer ring.stl It's smooth on the 8mm threaded rod. ------ **Technical informations** : - the old Longer spool diameter 80mm ext / 75mm int (with iner width 50mm) - Standard masterspool is 102mm diameter, here 103mm for `masterspool longer ring.stl` to be sure to feet Fiberlogy Refill Easy - the screw is ISO M70x4 with 0,6mm marging for my low cost printer (need a little grease)
Statistics
Likes
0
Downloads
0