Parametric Multiple SSD / Hard Drive Holding Bracket / Sled - Mixed Type
Description
This is an adaptation of the parametric drive holder that can accommodate two different types or sizes of drives (and any number of them) Default settings are for 1x 7.3mm thick 2.5" SSD, and 1x 26mm thick 3.5" HDD. Drive 1 must be the smaller of the two types, and will render on top of drive 2. STL files are included for two versions that use the default drive sizes and either one or two of the smaller drives. Rotate so that the back wall faces the build plate and enable supports before slicing.
Statistics
Likes
0
Downloads
0