Christmas Lithophane "ROUND"
Description
So.... This lithophane is made using https://lithophanemaker.com/Lithophane%20Tag.html I have posted a photo of my exact settings. IDK why the sizes are off, but you need to check your slicer prior to printing. It gives you the true dimensions. I had to use 42mm to get an 88.2mm lithophane. Either way my "ring" fits that size lithophane. Adjust slicer for more precise fitment if needed. But I print my Lithophanes vertically, so I get a better image. Please look at all the photos. I've tried to cover everything I've done to prevent any questioning. ---I've also shown a photo of the exact earing loops I used. "Hobby Lobby"--- *****NOTE: If you print vertically set your "Z height" to -1.1mm (+/-) and use a brim and supports so you give the lithophane the best chance for success. But you only want supports like the photo above IMO because I never want to leave the face of the lithophane with the nozzle AND USE ALL WALLS AND FILL ALL GAPS..! THE PRINT MUST BE SOLID.*****
Statistics
Likes
0
Downloads
0