BYO Gingerbread Man Bobble
Description
Overview: Build and customize your own gingerbread man bobble with this set of prints, just in time for the holiday season! This gingerbread man is designed to work with 3D Printy's (https://www.printables.com/social/106529-3d-printy/about) bobble-head springs and comes with a set of prints for custom decorations, including the following: Gumdrop eyes (or buttons) Frosting smile / frown mouth Frosting “neutral” mouth Dapper jacket (my personal favorite) Rolled-up shorts Patterned shirt Suspender pants and shirt Printing: I printed using PLA on the Prusa i3 MK3 with a bunch of different colors at 0.15mm layer height with a 0.4mm nozzle. I recommend slicing with different colors, as shown in the photos, to customize the outfits even more! Also, I recommend printing with the pegs flat on the print bed. With that orientation you should just need to include supports only on the build plate. You may also want to slow down print speed to help everything come out clean since some of the parts are quite small. I also included the STLs from 3D Printy's original spring and base designs that I used for ease of printing. You can find more base and spring options on 3D Printy's original design page on Printables. Be careful when removing support material as the parts can be delicate. To assemble, just use a little super glue to attach the eyes, mouth, and clothing. The spring can be press-inserted and if it doesn't fit initially I recommend just filing or sanding down the spring peg a little bit until it snaps into place. Please like it if you do and leave any comments! Check out my TikTok: https://www.tiktok.com/@gcv3d Check out my YouTube: https://www.youtube.com/channel/UC5bZDx5pKcU-l8q12rkAs9w
Statistics
Likes
0
Downloads
0