HP EliteBook 840 G3 HDD / SSD Caddy
Description
3D-Printed hard drive frame suitable for an HP EliteBook 840 G3 laptop. A frame is required if you want to install an additional HDD or SDD. Printing info: No need of additional support structure. There are small supports for the screw holes in the design. After printing you can cut off them easily. Please only use PETG or ABS, PLA will deform as the laptop heats up! Additional parts needed: - 4x M3x3 flat screws - 4x M2x6 countersunk screws Assembly: The hard drive can only screwed in one direction. The notch of the caddy, must be located on the hard drive's plug contacts. Please look at the pictures for the correct installation in the laptop!
Statistics
Likes
0
Downloads
0