Sonoff T1 dual microswitch cover
Description
This is a cover for the Sonoff T1 with two microswitch slots. The microswitches need to be connected to TP1 and TP2 on the back of the board and GND. Then you can program them to do whatever you like! I have one controlling the internal relay and the other one is just a MQTT button controlling a different light. You need to bend the legs of the microswitch back. Please be sure you have the right size microswitch - dimensions in the photos. Snaps on just like the original cover. ESPHome config: https://pastebin.com/nzfMstCZ Note: I made this just as a test-fit for my home office, I will be deploying these around the house and for that I'll sand it down, and spray it with a primer and a glossy white paint to make it look shiny and not obviously 3d printed
Statistics
Likes
0
Downloads
0