Fanatec DD1 DD2 Adjustment Slide
Description
There are lots of neat attachments for the side of your Fanatec DD1/DD2 Base (button boxes, Streamdeck connections, etc), but most of them mount perfectly vertically (well - aligned with the base). For me, thats almost always the wrong handle, so I designed these Slide adjusters to add on to anything that uses the same side connections so they can be adjusted on angle. You'll need to print 2 copies, and assembly involves 2 M8 cap head bolts (like what come with the base!) and 2 M8 hex nuts (either flanged or not). Insert an M8 nut into tjhe hex shaped pocket, and connect your accessory to the slide. The nut will sit in the pocket flush (or below flush) to not protrude from the slide. Then connect the slides through the slots into the base loosely, and adjust as you see fit, then tighten.
Statistics
Likes
0
Downloads
0