Norse Pendant, tree, casing
Description
IT is two bodys that turn into one. The first is the pendant, which is in black and gold, the second set is the casing, which is in white and gold in one picture and blue and gold in the other. Most pieces are used in both configuration. The rings are only used in the tree configuration. For the pendant, center long and center pop into place together with cylinder between them, and the legs of the top pendant fit underneath so it spins. The bottom pendant main body has a loop that cylinder goes through. Make sure to print in place hinges for bottom pendant main body and back to bottom. Snake with head prints in place with snake 2. Tree bottem false body and tree bottem false body roots are one on top of the other to allow different colors, like the gold and black in the picture. Same for connect false body top and connect back false body top. The branches pop into the side of the pendants main body, and the gems for the rings pop into the rings. the casing pops together and comes apart, I would recommend gluing either the top set or the bottom set after printing to make sure the alignment works well, but only one side (top or bottom) should be glued, the other should be able to pop off to slide into the ring of the main body when making the tree. The cylinder helps the top part of the tree keep balance.
Statistics
Likes
0
Downloads
0