Ender 3 V2 Raspberry PI Drawer
Description
There are lots of other Raspberry PI drawers available but I wasn't a fan of how they looked. I also wanted something a little more modular so I could spend less time printing if I decided to change things (like add a buck converter). This design uses a snap-in bottom so that you don't have to reprint the entire drawer if you make changes. I've provided the following bottoms: - **Bottom.stl** - Mounting for a Raspeberry PI 3/4 - **Bottom_With_Boost_Converter.stl** - Included a mounting point for a [24V - 5V 5A buck converter](Bottom_With_Boost_Converter) The bottom is tapped for M2.5 screws to secure the Raspberry PI. The back (far left) pegs have short extensions to align the PI without screws. Cut these extensions off with a knife if you want to use screws here.
Statistics
Likes
0
Downloads
0