VESA Mounting Plate Strengthened EVEN MORE

VESA Mounting Plate Strengthened EVEN MORE

Description

Wanted to convert a coat rack into a floor TV stand. Found DReffects' VESA Post / Pole Mount and then USV87's strengthened plate but the plate couldn't hold my TV at an angle without the supports breaking as I was using PLA. So I doubled the thickness of the supports (from 7mm thick to 14) and beefed up its feet. This will now support the weight of a TV/Monitor positioned at a 45°+ angle without any issues. Printed at 100% infill. Solid as a rock. The diameter of the coat rack's pole is 38mm so I made this to fit both a 35mm and 38mm pole. Its scaled for 35mm out if the box (outer holes fit VESA 100). If you just so happen to need a mount for a 38mm pole then simply scale this up 8% and the inner holes will now fit the VESA 100 mounting holes. Use the pole mount from either DReffects or USV87 as is if you are using it for a standard 35mm pole but be sure to scale it up +8% for a 38mm pole. I used a stainless steel 5/16 x 3-1/2 inch hex bolt from Home Depot (code CAO) to secure the plate to the mount. Added a single pistol grip washer for extra grip (without having to torque the bolt too tight) for the weight of the angled TV/Monitor.

Statistics

Likes

0

Downloads

0

Category

Computer

Tags