Ender 3 V2 Nozzle Cleaner for stock setup
Description
This is a modified version of bluesforte's Nozzle Cleaner. It fits for the stock setup of an Ender 3 V2. Needs two M3 threaded inserts (4.6 x 5.7mm) to attach the bucket to the holder. Holder can be mounted to Z-Axis using M3 T-nuts and screws. Mount it at the lowest possible point to prevent issues while tramming with a BL/CR-Touch! The brass brush should barely touch the nozzle. Custom Start-GCODE: >> before: auto-home, load mesh, etc. G1 Z50 F240 ; move gantry up G1 X248 F3000 ; move head to the right edge M104 S{first_layer_temperature[0]} ; set final nozzle temp M190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize M109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize G1 Z0 F240 ; move gantry down to brush G1 E20 F50 ; extrude 20 G4 P5000 ; wait 5 sec G1 X232 F3000 ; wipe nozzle by moving head to the left G1 Z5 F240 ; move gantry up to prevent scratches >> next: prime nozzle
Statistics
Likes
0
Downloads
0