Gas Metering Device - Housing for PCB
Description
Introduction This is a housing for a gas metering electronics device. Printing Either use the gcode file provided or slice the stl file. I used PLA, 3 perimeters. Note: for the lid, the stands tend to break if they are not filled with additional cycle. This is is already available in the gcode. If you use the STL file I recommend to add a cyclinder volume in the slicer program for both stands of the lid. Use height of 9mm. Change it to your needs Don't hesitate to change the housing to your needs. An OpenSCAD file has been attached. Home automation The sensor can be connected to various home automation devices, I plan to use it in an Homematic environment, see here: https://github.com/JurgenO/GasMetering/wiki Disclaimer Use the housing on your own risk.
Statistics
Likes
0
Downloads
0