FXX 2.0 (Maybe RRX,RMX) battery relocation platform
Description
So I’m trying work on a platform that lets us FXX 2.0 owners relocate the battery in various locations (idk if these would fit RMX/RRX. The rear bumper bracket does i think). So far I modeled a battery tray to hold a shorty lipo battery and secure it with a rubberband, hair bands, or a velcro strap. The hooks on each end (3 on each side) can be cut to allow of battery tray positions to fit. I will work on adjusting them in positions so they don’t need to be cut and will clear the top suspension mount. I used the stock gyro bracket holes to make a bracket. There’s a lo-profile bracket and a 5mm higher bracket. I used the rear of the top brace mounting holes for a bracket mount. And finally used the rear bumper mount for a bracket. I’ve made a 10 degree bracket and a 20 degree. The picture with the battery installed is the 20 degree angle. I plan on making more brackets and fine tuning some parts to be more versatile. I also want to do other mods. Maybe come up with a battery tray to use the stock battery holder for the brackets, maybe a cable comb to organize the front motor wires and sensor cable as they run along the top brace. and probably some sort of system that puts the servo and receiver in the stock battery tray location. I don’t have a 4-corner scale so idk how these change bias. Just by eye however, if I pick the car up in the middle with the lipo in the rear bumper. The car will tilt back. So some change!
Statistics
Likes
0
Downloads
0