Yetser Terrain - Industrial Set 2 Additions

Description

Additional pieces designed in the same style as Industrial Set 2. Enhance your rooms, bunkers or corridors with corners and transitions from standard width floors to half-width ones to create narrow corridors or walkways. The Yetser Terrain Connection System is designed to be as modular as possible. All wall pieces have designs on both sides, so that they can used as internal or external walls. Floor tiles contain designs on both the top and the bottom, and are therefore designed for use as both floor and ceilings. The Set includes variants of the Floor tiles that print floor side down, without supports, and floor side up, which contains inbuilt supports. The Connectors fit in any of the slots within the Pillars, facing both up and down, which gives you great flexibility in your terrain layout. The set contains: Half length Connector (34 mm) Medium height Pillar (71 mm) Central transition from standard floor tile to half-width floor tile 1 x Medium height Pillar (71 mm) design Left-aligned transition from standard floor tile to half-width floor tile 1 x Medium height Pillar (71 mm) design Right-aligned transition from standard floor tile to half-width floor tile 1 x Half-width Floor tile design 1 x Half-width Wall tile design (69 mm) 1 x Quarter-size Floor tile design 1 x Angled corner Floor tile design 1 x Angled corner Wall tile design (69 mm) 1 x Curved corner Floor tile design 1 x Curved corner Wall tile design (69 mm) 1 x Half-width Floor tile design outside corner 1 x Half-width Wall tile design (69 mm) outside corner 1 x Half-width Floor tile design inside corner 1 x Half-width Wall tile design (69 mm) inside corner Full details of the terrain pieces included in this set can be found below. The Medium height Pillars contain 1 additional slot down each side, allowing you to transition from the Small wall heights to the medium ones. This makes moving from a walkway to a corridor or room nice and easy. Info: All pieces are designed using the Yetser Terrain Connection System for use with 28mm scale miniatures. Designed for FDM printing and without the need for supports, all pieces have been test printed on a Prusa Original i3 MK3S+ printer using the normal settings. Some pieces may include integrated support structures, which should come away cleanly with careful use of a craft knife. Please note, these sets contain small parts and are not suitable for young children.

Statistics

Category

Tags