Yetser Terrain - Industrial Set 4

Description

Build rooms, bunkers or corridors with the fully modular terrain included in this set. Create the layout of your room using the Pillars and Connectors then fit in the floor and wall tiles to complete the structure. The Yetser Terrain Connection System is designed to be as modular as possible. All wall pieces have designs on both sides, so that they can used as internal or external walls. Floor tiles contain designs on both the top and the bottom, and are therefore designed for use as both floor and ceilings. The Set includes variants of the Floor tiles that print floor side down, without supports, and floor side up, which contains inbuilt supports. The Connectors fit in any of the slots within the Pillars, facing both up and down, which gives you great flexibility in your terrain layout. The set contains: Standard length Connector (69 mm) Double-length Connector (134 mm) Tall height Pillar (116 mm) Tall height Pillar (116 mm) with increased print foot 1 x External Buttress design Pillar/Floor Cap 2 x Floor tile designs 1 x Wall tile with Door design (110 mm) 5 x Wall tile designs (110 mm) 1 x Double-length Wall tile design (110 mm) 1 x Double-length Wall tile design (110 mm) with Door (Prints in three pieces, wall, door and support) Full details of the terrain pieces included in this set can be found below. The Tall height Pillars contain 2 additional slots down each side, allowing you to transition from the Small and Medium wall heights to the tall ones. This makes moving from a corridor to a large room nice and easy. Doors are printed in 3 parts; the wall, the door itself and the “door step”. The final piece slots into the bottom of the wall, holding the door in place whilst still allowing it to swing. The Double-length Wall design containing the Doorway has slots within the door frame, which allow you to slide the support piece through them, holding the door at different heights. Use this function for scenarios where your forces might have to hold an objective for multiple rounds, for example, to shut the door on the opposing forces or just as a decorative element to the game. Info: All pieces are designed using the Yetser Terrain Connection System for use with 28mm scale miniatures. Designed for FDM printing and without the need for supports, all pieces have been test printed on a Prusa Original i3 MK3S+ printer using the normal settings. Some pieces may include integrated support structures, which should come away cleanly with careful use of a craft knife. Please note, these sets contain small parts and are not suitable for young children.

Statistics

Category

Tags