lcd 2004 case for 3d printers
Description
This is a new case model to mount an lcd 2004 including all the required acessories to mount the case in a slot20. All screws are M3x8 and M3 inset nuts are used to fix all parts, so,these nuts need to be inserted in the 4mm holes, applying some heat with a solder iron, as usual. The union of the lcd2004_case_fix with lcd2004_slot20_fix, forms a joint (hinge) that uses M5x20 screws and locknuts M5 to create enough pressure between the two parts and at the same time prevent the screws from loosening. Also... it is convenient to use washers on both sides, on the screw and on the nut.
Statistics
Likes
0
Downloads
0