Quest Rifle
Description
I remixed this rifle stock from smassie75's excellent remix of Sanlaki's design (https://www.thingiverse.com/thing:4538594)... I re-designed this VR Rifle Stock to be SIMPLE, Fast to make, and to use common 1/2-Inch, Schedule 40, PVC Pipe. I use about 14 Inches of Pipe, but some of my friends use 12 inches or even 18 inches, it's up to you, this Quest-Rifle-Pack is just the items needed for you to make a custom fit Gaming Rifle. There are a variety of Butt-Stocks included that fit the rifle, some with cheek rests, some without. Attachment points for a sling are also provided, as well as the ability to raise or lower the Butt-Stock to fit "You". I used four "100 Pound Neodymium Magnets" from Amazon ("https://www.amazon.com/dp/B072K586ZW?psc=1&ref=ppx_yo2ov_dt_b_product_details).. I used the type of Magnets that sit in a metal case, with a hole through the center: (DIYMAG Neodymium Round Base Cup Magnet,100LBS Strong Rare Earth Magnets with Heavy Duty Countersunk Hole and Stainless Screws for Refrigerator Magnets,Office,Craft,etc-Dia 1.26 inch-Pack of 10) The magnet mounts fit inside the Ring of your Hand-Controllers, and then you just "Rotate the the Hand-grips to pull the Hand-Controllers away from the Magnet attachment points of the rifle, so I can switch between rifles and swords, or grenades, or climbing, "On-The-Fly" while playing "Population: One" or "Contractors" in VR.. The magnets don't interfere with the Quest Equipment at all. The Hand Controllers will "Self-Find" their positions on the Rifle Stock while it's hanging down on a strap without you having to look for the stock. I've printed over 30 of these rifles for friends and family, and printed probably 100 Variations and failed designs along the way ;) I used Microsoft 3D Builder to design this, so there may be some minor artifacts in some of the stl files.. "It is what it is", sorry... There is a "Drill Template" included with holes on both sides that will slide over 1/2-Inch PVC Pipe so you can make holes on your PVC Pipe on both sides to accept the pins that hold the parts in Place... It makes the rifle stock VERY adjustable!! I used a piece of another Butt-Stock for the "Aggressive Butt-Stock" Add-On piece, which I'll link as soon as I find it again... (Sorry)
Statistics
Likes
0
Downloads
0