Magnetic 25mm RPG Miniature Base (Resin pre-supported)
Description
This remix is a pre-supported version for resin printing of the original things. Supports were created manually in Lychee slicer and successfully test-printed. I wanted the magnetic elite base add-on to be sandwiched around the magnet instead of only on one side, so I created a 1mm thinner version of the original elite base. This worked perfectly for me with 10x2mm round magnets. I did not create pre-supported files of the elite bases, as I printed them flat on the build plate with a flex plate and Lychee elephant foot compensation. I did not use all types of tops available in the original things, but you can easily transfer the supports of my pre-supported tops (top-stone or top-tile) by opening them in Lychee, selecting the model in the "Layout" tab (top of window) and then replace the STL using the "Browse" button on the right side of the Lychee window. This will keep the supports intact while switching out the STL. PS: the other tops might require additional supports; I did not check, so I recommend you do yourself. PS2:if you're lucky, the tops can be printed flat on the build plate, but for some reason they did not stick for me on my flexplate. For the bottom pieces this is difficult as they are basically one huge suction cup. But if you can pull that off, it's probably superior and less work than what I uploaded here!
Statistics
Likes
1
Downloads
1