Bambu Carbon X1 Poop Shoot (Purge bin)
Description
XL - Purge Bucket to catch the purge filament 'droppings' that come out of the back of the Carbon X1. I know there are several of these already out there, but I wanted to make one that was XL in size as I have room on the table behind my Carbon X1. Unfortunately, you will need a larger printer to print this bin as it is 270x190x160 and won't fit on most typical ~200x200 printers. This was inspired by others that are out there, again I just needed a larger one. 2 versions available: 1.6mm and 2.00mm thick (Mine is currently printing, I may add photos when completed) PLA 0.20 layer height (or higher) will be fine 10% infill (what I used, only need at very bottom) No supports needed (I used 0.60mm nozzle w/0.40mm layer height)
Statistics
Likes
0
Downloads
0