Eryone Thinker SE Linear Rails Y Axis Mod (Remix)
Description
Want more stability than a single carriage. Remix this to use a 450mm Linear Rail with 2 MGN12C Carriages. Has 2 designs: - 1 with a Bracket broken into 2 pieces like the original design and can be printed with not support. (Bracket_Left, BracketSpacer_Left, Bracket_Right, BracketSpacer_Right) - The other with one piece that will require the pieces to be printed upside down and add support for the screw insets, which I preferred. (BracketNoSpacer_Left, BracketNoSpacer_Right) Both designs require printing the BeltSpacer which handles the attachment or the Y Axis Belt and the end stop bumper for the Y Axis sensor. If you reuse the existing M5 screws from the bed, it is required to print 6 x ScrewSpacer(s). Assembly required 16 x M3 6mm screw for the attaching the adaptor to the Linear Rail MGN12C Carriages. 6 x M5 screw from the existing bed, else you can use 6 x M5 12-14mm if you want to not print the Screw Spacers. It is also need to have 2 x M3 20mm to attach the Belt Spacer
Statistics
Likes
0
Downloads
1