Simulated Vitals Hardware Hangers
Description
This is a set of hangers to go onto a Laerdal patient monitor, which is an HP AIO PC. I'm sure this would work for many other types, but I haven't tested them. The HP AIO has an inset place in the back where you can stick these hangers on with either double-sided tape or velcro. Velcro is my choice. Hanger 1 was created for when there is an arm that the Pt monitor is hanging off of the wall. Hanger two is for when they are mounted to the wall. I would not recommend using these unless the Pt monitor is mounted to a surface. If it is sitting on a table you can pull the monitor to the ground and break it. I have done all final testing with 50% infill and that should make the parts pretty strong. I have tried different materials and like PET-G the best because of its flexibility before breaking, but PLA works fine. Information on YouTube here: https://youtu.be/YCDb9hWDa3Q
Statistics
Likes
0
Downloads
0