Solar Panel Corner Protector - Bumper for HQST 100 watt
Description
I created this thing to protect the corners of HQST 100 watt solar panels. The panel frame trim dimensions used for designing these bumpers are 7mm x 30mm x 25mm (small front side trim of panel, side trim of panel, larger back side trim of panel). There is a slightly raised bump on the inside to help lock the bumper in place that fits into the larger square hole on the backside of the frame in each corner. Infill: 20% Layer Height: .20mm Material: [Inland PLA+](https://www.amazon.com/Inland-1-75mm-PLA-Printer-Filament/dp/B081S6BMCD?crid=36T0FHOQ0DBPE&keywords=inland%2Bpla%2Bplus&qid=1672059556&sprefix=inland%2Bplaplus,aps,70&sr=8-2&th=1&linkCode=sl1&tag=archirockstech-20&linkId=1219683b5d7be1419380bd7aef37439e&language=en_US&ref_=as_li_ss_tl) Printed on an AnkerMake M5. 16x bumpers took 8.5 hours. [HQST Solar Panel 4pcs 100 Watt 12V Monocrystalline](https://www.amazon.com/Inland-1-75mm-PLA-Printer-Filament/dp/B081S6BMCD?crid=36T0FHOQ0DBPE&keywords=inland%2Bpla%2Bplus&qid=1672059556&sprefix=inland%2Bplaplus,aps,70&sr=8-2&th=1&linkCode=sl1&tag=archirockstech-20&linkId=1219683b5d7be1419380bd7aef37439e&language=en_US&ref_=as_li_ss_tl) Designed in SolveSpace.
Statistics
Likes
0
Downloads
0