Pan and Tilt Gimbal Heewing Ranger T1
Description
Hello, This is a pan and tilt gimbal for the Heewing Ranger T1. At the bottom of the plan is a piece for the servo that attaches there without glue. It holds the servo in place. The servo horns are used to have a good attachment for the servo. One on the bottom and one on the side of the gimbal. You need to trim them into shape a bit. I used two-component glue to attach it. Please make sure you stick them straight. The camera is then attached to the top of the servo with two screws on a holder that's put on the side of the servo and a litte bit of tape that's put on the botton of the camera. It's made for the dji fpv camera. The servos used are the "VOTIK 7350 MG-D Digital Servo Metal gear".
Statistics
Likes
0
Downloads
0