Knife Sharpening Guide: taller sliders and extenders, including step files
Description
Additional sliders for the Knife Sharpening Guide by DROP_DB. Inspired by https://www.thingiverse.com/thing:4751487, but I did not use his file. I recreated the 15, 17, and 20 degree sliders in CAD, then created 3mm taller versions so the guide would work with my slightly taller whetstones. I had already printed the 17 deg original one, so I also designed the "extensions", which you can epoxy to the original sliders to make them taller. The step file for both the extension (3mm) and the original 17 deg slider (not extended) are included so you can modify them in CAD to fit your application. I suggest using PETG for all of the knife sharpening guide parts since it is slippery and tougher than PLA.
Statistics
Likes
0
Downloads
0