Hayear Microscope Vesa Mount

Hayear Microscope Vesa Mount

Description

This is a replacement adapter for a Hayear electronics microscope with a c mount lens. This part will replace the mount that attaches to the vertical 25mm pole so you can attach the c mount focal adjuster to a monitor arm with a 75mm vesa mount. You will need to disassemble your existing mount and swap the parts over. I printed using tree supports everywhere with a brim for adhesion. You will also need: 4 x M5x6x7 Treaded Inserts 2 x M3x6x5 Threaded Inserts 4 x M5x12 Bolts (I used Hex Socket Head) The threaded inserts could probably also be omitted since you can use longer bolts with washers for the vesa mount and skip the set screws on the adjuster since it fits pretty snug.

Statistics

Likes

0

Downloads

0

Category

Parts