Ice Fishing Shuttle for Garmin and Humminbird
Description
This project is available to the public. My only requests are that you do not sell these commercially. If you can not print them I will have them available for purchase. The file is free but I would appreciate a donation for my time designing this product. Hardware: (14) ¼” x ¾” Bolt (pan head or allen head works best) (12) ¼” Nut (6) #6 x ½” pan head screw (8 if using Garmin Striker 4 mount) (4) #8 x ¾” pan head bolt (brass coated recommended) (12) #8 washer (brass coated recommended) (8) #8 nut (brass coated recommended) Wiring Components: (1) 3 pin 12v rectangular rocker switch (1) 12v voltage meter (to fit a 1 3/16” hole (1) 3 pin 12v round rocker switch (to fit a 22mm hole) (1) LED license plate light (12) Female spade connector for 18 ga wire (2) Male spade connector for 18 ga wire (8) Ring terminal (make sure they fit #8 bolts) for 16-18 ga wire (3-4’)18 ga wire (2’) 16 ga wire optional : ¼” heat shrink tubing (comes in packages of 3 pieces ~10” long) Assembly instructions and pictures will be posted in a following Google Doc. I'm working this week to put this together.
Statistics
Likes
0
Downloads
0