Litophane LED holder
Description
I made my own illuminated lithophane holder. It works with a battery and it is used to keep the lithophanes vertically, being illuminated by a led light. To make it I designed the support in 3D and printed it in PLA. The supports are necessary for the switch hole. I also had to solder the cables and install the components, detailed below. **The list of necessary materials I have used to make it:** - Strips of 12 V led lights, cut to 3 leds ( https://es.aliexpress.com/item/32985997048.html ) - Battery 6LR61 of 9 V - Switch with size 9 x 14 mm ( https://es.aliexpress.com/item/32870238027.html ) - Connector for 9 V batteries ( https://es.aliexpress.com/item/33038425138.html ) **NOTE:** The LEDs I have used use a nominal voltage of 12V, however the 9V battery provides enough voltage to run them. You could also use a strip of 5V nominal voltage LEDs connected in series with a resistor.
Statistics
Likes
0
Downloads
0