M3D Filament Guide V.3 (Angled)

Description

Version 3 Of The M3D Filament Guide. I Wanted To See If The Purely Vertical Version Or An Angled Version Worked Better, But Then Had Some Minor Issues With The Filament Not Sliding Smoothly Through The Opening. Not Wanting To Give Up On The Idea, I Took Another Few Passes And Came Up With This. A Simple Side Hook Filament Guide For The M3D Micro Printer. If You Are Using The M3D Initial Spool (From The M3D Download Section), This Will Reduce The Drag Of The Filament Over The Side Of The Chassis And The Spool Holder Hook. The Opening For The Filament In The Guide Is Designed To Allow The Filament To Enter And Exit The Filament Guide At A Range Of Angles. This Should Reduce The Amount Of Friction And All For Smoother Delivery Of Filament To The Extruder. **Update:** I Am Working On An Updated Version Based On The Feedback From A Few Helpful Users. The Next Version Should Be Able Slide More Smoothly Along The Frame Rails As Well As Have A Small Change To The Filament Pathway. Thanks To **[Tadd85](Http://Www.Thingiverse.Com/Tadd85)** And **[Firefox_Gaming](Http://Www.Thingiverse.Com/Firefox_Gaming)** For Their Feedback.

Statistics

Category

Tags