Flexy-Hand 2 With Out Flexy filament
Description
As An E-Nable Volunteer I Wanted To Make A Flexy-Hand 2 With Minimal Hassle To Test And Add To My Hand Types List That I Could Make. If You Are Considering Building A Fexy-Hand Or Flexy Hand 2 But Don'T Want To Go Down The Difficult Learning Curve To Use Flexible Filament, A Process According To Other Builders And The Various Forums, Includes Extruder Gear Jams And Other Frustrations For Each Of The Many Filaments, You May Want To Use This Mould To Make A Complete Set Of Flexy Joints In One Pass With Out Experimenting On Your 3D Printer. I Have Modified The Shape Of All The Hinges Slightly To Produce A Strudy Hand Action And Tested It Just For Ooogoo And I Am Pleased With The Results. About A $3.00 Investment. The Mould Is Sized To Fit A Flexy Hand2 Of 100% Scale. If You Print A Hand At 110% Just Print The Mould At 110% And They Should Match. Trim As Required To Align Joints Exactly.
Statistics
Likes
30
Downloads
0