Uno card holder
Description
The box of my UNO cards has seen its better days, so I decided to 3D print a solution. This is designed for the standard 108 card deck. If you have a larger deck, you may have to scale it up. I printed this design upright, using Cura's tree supports for the top overhang, just so it's easier to remove. The lid obviously needs no supports 5% infill should be enough, though I used 15 for rigidity. The lid is friction fit, you may have to scale it by +-0.1 mm depending on how it fits.
Statistics
Likes
0
Downloads
0