Ramiel the Fifth Angel
Description
Neon Genesis Evangelion's Fifth (and most badass) angel I made this with Clear Blue Resin in mind for the body, to enhance the coolness factor, and so for best effect I recommend not hollowing the body halves if you do use Clear Resin. To make a closed version, just print out the RAMIEL CLOSED twice, along with a CORE, or CORE HALF if you don't want to use supports (could ruin the finish of the core) For the opened versions, there are slight differences. I made the first version to have the body halves glued to the core, so there is nothing else keeping both halves from moving. You'll need the Ramiel Open x2, Ramiel Core (or Half x2) and the Spacer x4 (to keep the body halves parallel as the glue dries). The Open 2.0 version has slightly protruding angled inner surfaces (as requested by a friend of mine), integrated aligning rods built into the body halves, and a pierced core for said rods to be inserted into, making it glue-free. For this, print Ramiel Open 2.0 x2 and Ramiel Core 2.0 once (no spacers needed either) Will be updating with various support bases soon.
Statistics
Likes
0
Downloads
0