file cabinet handle traditional curved
Description
Movers removed my file cabinet handles and then lost them. I modeled this off of the aluminum handles that I am replacing. I only saw square ones in the current free models, whereas these ones are slightly curved. Can print in place and doesn't require any supports, at least not with my setup. The holes are sized so that heat set inserts can be inserted to accomodate any of those extra M3 bolts we all have lying around from 3d printers and accessories. I'm using these heat set inserts. https://www.amazon.com/dp/B0B46YBNV4?ref=ppx_yo2ov_dt_b_product_details&th=1 To know if these handles will fit your cabinet as currently sized, the distance between the holes on either side of the handle is 98.8 mm. I suppose you could scale the object even in your slicer to accomodate a different distance, just remember this may stretch the holes the inserts go in. Depending on your inserts or screws you are using, it may or may not matter much.
Statistics
Likes
0
Downloads
0