BIGTREETECH Smart Filament Sensor Housing (2020 extrusion bracket)
Description
Printed in ABS (PLA or PLA+ should be fine) at 60% infill. You will also need: M3 heat-set inserts x2 M3 x 6 screws x2 or M3 x 8 screws x2 M5 x 10 screw x1 M5 2020 T-Nut x1 Heat-set inserts go into the bottom housing. The sensor is held to the extrusion with 1 M5 x 10 screw into a T-Nut.
Statistics
Likes
0
Downloads
4