Fire Tab HD10 Gen.11 Wall and WESA100 mount
Description
Hello everyone, my first thingy, I just want to share something back to the comunity. Hope somebody will find it usefull. It's a simple Fire Tab HD10 wall holder. With WESA100 holes as well. In just did not like to have the joints of the frame in the middle, so the only way to print it on small printer like Ender 3 V2, was to split up the frame in 4 pieces. The left/ right pieces are interchangeable, so you can use the left one if you don't want a power button. Same applies for the top and bottom. If you don't need a camera hole you can use the bottom one. Be sure that your X and Y axis are square. By default I had a deviation of 1,8mm/150mm, which was messing up the squarness of the built. Supports are needed only to print the centering clips for the base frame. For the power button, just use a half of a pen spring.
Statistics
Likes
1
Downloads
0