Ender 2 Pro Fan Mount (No additional Hardware)
Description
No additional Hardware needed! This Hot-End fan gets rid of the stock plastic cover drastically increasing visibility. Print time was about 1h 15min and fits the stock 4010 fan on the Ender 2 Pro. The three bolts needed are the same bolts that secured the stock cover (two long for the fan and one short to secure the mount to the mounting plate). TO INSTALL: You may need to press down firmly to install mount due to the small bump on the inside of the mount. This bump will rest within the top bolt hole in the metal mounting plate. (See the red bump in the pictures)
Statistics
Likes
0
Downloads
0