Aquila Multi Mount Cover
Description
After seeing D4rKiTo's cover it hit me that for whatever reason I always get a wire rubbing up against the fan after getting it all back together. Mount the fan on the outside of this design (or inside for the shorter 10mm deep fans if you can manage the wires). You will need some taller feet to make mounting on the outside work and there are plenty of designs for that. You can use what you have in terms of fan size, 80, 60 or 40 or experiment to reduce noise.There is a spot to tie wrap in a voltage converter if you want to run a bigger yet slower fan. Notched one side for the display ribbon cable so that sits a bit neater too. Have hard wired this fan to the same spot that drives the heat break fan so it is on all the time as my control board seems to not kick in the fan until it is too late.
Statistics
Likes
0
Downloads
0