Simple Voron filament sensor that secures the Bowden tube
Description
I can't upload this as a Voron usermod, because I can't meet all the requirements with the CAD file format, printing without supports, the editing of a Readme table, the creating of a subfolder, etc. etc. Nevertheless I hope you will enjoy this and find it useful. I looked at dozens of filament sensors, but none fitted my requirement of having the filament threaded in underneath, the standard microswitch concealed behind, and being fastened to the left side of the Voron 2.4's frame (should work with the Trident too). This can either be used with the standard filament spoolholder (attached to the frame below this), or a filament drying box as I use. This is printed with supports under the end that fits onto the frame. Use 1x 20mm M3 screw, 1x M3 T-nut (the twist-in type), 2x M2 self-tapping screws, 2x M3 nuts or similar spacers as required for the self-tapping screws, 1x microswitch with lever.
Statistics
Likes
0
Downloads
0