PS/2 to USB Type C Converter Case
Description
This is a small case meant for building a DIY PS/2 to USB-C converter. It is designed to house a a pro-micro USB-C controller, though I have only tested it with a cheaper Chinese clone of the pro-micro, so your mileage may vary with the real thing. The clone can be purchased for a very low price from aliexpress: https://www.aliexpress.us/item/2251832663249206.html The PS/2 connector that this is fitted for is can be purchased on amazon: https://www.amazon.com/uxcell-S-video-Connector-Adapter-Sockets/dp/B00GWEU5T4 TIP FOR PRINTING (IMPORTANT): * Print the lid vertically standing up, so that the face where the usb-c controller comes out is on the print bed. DO NOT print the lid with the large flat part on the print bed, as the direction of the print layers will cause the tabs holding it to the case to be very weak and will break very easily. * Both the lid and body will need to be printed with support material.
Statistics
Likes
0
Downloads
0