Voxelab Aquila Raspberry Pi 4B case with buck converter
Description
This is a remix for the Raspberry Pi 4B from Moon_buggy. I added stand offs for a Buck converter to be mounted inside the case next to the Pi. I didn't need any of the HDMI or power connections on the board. I also remixed the fan shroud to channel air across the board hopefully increasing airflow over the buck converter. The screw holes in the shroud were resized for 3mm screws I had on hand. You will have to drill the pi mount holes to fit the larger screws as well. I also made a matching fan so the same 24v 4010 fans used for the hot end and main board can be used on the Pi as well. I soldered the fan connections to the input side of the buck converter getting 24v from the power supply. Buck converter used: https://www.amazon.com/gp/product/B079N9BFZC
Statistics
Likes
0
Downloads
0