Oric Atmos Case Modification
Description
This case modification extends the height of the Oric Atmos case by 3.5 mm allowing for socketing the RAM and VIA ICs without collision. The capacitor C35 should be changed for a smaller one or the original capacitor should be bent on the left side (usually they are bent on the right side) in order to avoid a conflict with one motherboard spacer (MB spacer). The 6 lid spacers fit on the 6 black screw mounting posts. The 4 case spacers fit on the case and lid grooves. Since the case is 3.5mm higher, you should use 3.5mm longer screws: M3.5x12mm, inox, self-tapping.
Statistics
Likes
0
Downloads
0