Phrozen Sonic Mini Heater
Description
This is a chamber heater upgrade for the PhrozenSonicMini. Most resins like to be kept between 25 - 30 C, but my garage gets colder than that at night, so I made this to compensate. Installing this will require drilling three holes into the UV shield that comes with the Phrozen Sonic Mini, they're not large and the material drills very easily, but proceed at your own risk. Don't start this project if you're not comfortable wiring AC and DC circuits. I wired the AC switch to interrupt power to the PSU instead of controlling power to the heater control (less parasitic power loss in the switch). Print Settings
Statistics
Likes
0
Downloads
0