DYS Eagle eye gimbal CAMLEVER mod
Description
I Think That This Gimbal Has A Great Design, But Adjusting The Center Of Gravity Is A Pain, You Have To Tight And Untight Screws Constantly. I Decided To Make My Own Camlevers, So Just Moving The Lever, You Get The Axis Free To Move To The Desired Position. You Will Need: 4 Camlevershort For The Camera Cage. 4 6Mm Diameter Aluminum Bar With 3Mm Holes 8 M3X20 Screws 4 Camlever Or Camleverlong (For The Other Axis) 4 6Mm Diameter Aluminum Bar With 3Mm Holes 8 M3X45 Or M3X50 Screws If You Use The Camlever, You Have A Gap Between The Screws And The Lever, So The Lever Moves And Is Not Centered Unless You Center It Before Adjust. If You Don'T Want To Have This Gap, Use Camleverlong.
Statistics
Likes
5
Downloads
0