Guitar Pick-azine
Description
I took user analogpixel's excellent design and added a feed-plate between the picks and compression spring, made it a little taller to hold seven medium picks, and made an alternative design with similar print time that releives the upward/downward stress against glued structures, along with angling and splitting the feedplate, also adding some texture to add space between the picks and the plate for easier dispensing. 3/8" compression spring (I think I used a x5/8" and a x3/4") from this set: https://www.amazon.com/gp/product/B000K7M36W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Printed on a Snapmaker 2.0 (210 extruder w/ 70 degree heated bed for initial layers and down to 205/50) with eSun 1.75 Black PLA+, superglued together and clamped for a few hours. 45% density trihexagonal infill an, for the reinforced version, easily-removable (15% at 50 degree overhang angle) supports.
Statistics
Likes
0
Downloads
0