Three-tier Guitar Effects Pedalboard Bracket
Description
Sorry for the horrendous quality in the pictures - Thingiverse won't let me upload the unless they're under 500KB. I combined the low- and mid-tier brackets from user roijeric's design, added some crossbar reinforcement to the mid-tier, and printed. PLA wasn't holding up, so I got some eSUN PLA+ - in the future, I'll experiment with PETG. I had some issues with the heated bed and warping upward, but the prints are stable and strong. Using the top portion of the feet (https://www.printables.com/model/290139-pedal-board-feet - the tops are included in this design's zip) in Wilderness18's make of the brackets (PLA instead of TPU), the brackets were bolted to a 12"x24" birch ply board as the "lower deck," while the remainder of that 24"x24" board was used to make the upper deck (measuring 16"x12"). I had hoped to laser-cut the upper-deck's holes, but my home laser is too small and the local shop didn't think they could, so instead, I had them etch guidelines and jigsawed the openings. SVG is included if you want to give it a shot. Added some sound-sensitive Govee LEDs for a little flash. Also included are the 90 degree brackets used when the surge protector was not getting enough clearance, and the modified Focusrite Scarlett bracket to house the Donner Power unit. Misc parts used: 400mm aluminum extrusions were used with various M5 bolts. https://www.amazon.com/dp/B07WZHN2XS?psc=1&ref=ppx_yo2ov_dt_b_product_details The extrusions were secured to the brackets with T-slot nuts. https://www.amazon.com/dp/B07FPLZXTF?psc=1&ref=ppx_yo2ov_dt_b_product_details End caps for extrusions: https://www.amazon.com/gp/product/B09JS8L4XT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Surge protector: https://www.amazon.com/gp/product/B09XQKK44D/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Donner Effects Pedal Power Supply: https://www.amazon.com/gp/product/B00WHLLDWO/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Rubber feet added to the lower deck (went to Lowe's for better, shorter screws): https://www.amazon.com/dp/B0B9YDJBN5?psc=1&ref=ppx_yo2ov_dt_b_product_details Aluminum handles (handy for routing cables): https://www.amazon.com/gp/product/B07QN3YRDS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I don't recall but I believe I used M6 or M8 bolts to secure the handles: https://www.amazon.com/gp/product/B09KMSHNKP/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Industrial velcro used on the extrusions, upper deck area, and pedals: https://www.amazon.com/gp/product/B0B74YZVSN/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Govee USB LEDs: https://www.amazon.com/gp/product/B0796TLP4S/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Statistics
Likes
0
Downloads
0