DnD terrain rollers
Description
These digital 3D printable models of Stamp Rollers are meant to be used to create patterns of various ground terrains for Dungeon and Dragons! They can be used on modeling putty, clay, or XPS polystyrene. The rollers are 15 cm high and the length of the pattern is 10 cm (6×4 squares, each 2.5 cm). The download contains 4 original texture rollers (STL – swamp, decorative tiles, wooden floor, stone road) ready to be 3D printed and 1 grid pattern roller. These three serve as a sample set, feel free to try them! More amazing terrain rollers and DnD accessories ->>> https://3d-mon.com/3d-model/groupe/unisex3dprintmodel/dnd-terrain-rollers-bundle/ SIZE At 100% scale, the large roller’s dimensions are approximately: - Width 30 mm - Length 30 mm - Height 150 mm You can scale the model as you wish, but we can’t guarantee that the model will print well at a much smaller size. --- Commercial license: A commercial license is not needed. You can sell the physical printed rollers as long as you use your own photos and link to this product page - where people can find the digital files. These models were brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com/links/ 3D PRINTING SETTINGS If you decide to print on FDM, use these settings: Layer height 0.15 mm Infill 10% Outer perimeters: 0.35 mm Printing settings will vary greatly depending on your specific printer.
Statistics
Likes
525
Downloads
2424