Walksnail VRX mount for XFLIP FPV Goggles
Description
This is a simple press-fit mount for the Walksnail VRX on the XFLIP FPV goggles. It slides over the fan mount and between the faceplate and fan (there is no room there actually so it sort of pushes the faceplate back a bit... I use a custom faceplate that goes lower to relieve pressure on my cheek bones, and it doesn't seem to be a problem (light leakage). The VRX is held about 2mm away from the front of the goggle curve, just enough space to put some double sided tape to prevent flopping around. Yes its blocky. I designed it in Tinkercad and have no artistic skills. But it works, and its better than using gaffer tape to hold it on, right?? Use an M2 screw with a small washer on one side, and M2 nut press fit on the other side. Printed on a stock Ender 3 v2 with TPU, sliced with Cura slicer with default 95A TPU profile.
Statistics
Likes
0
Downloads
0