Adjusted Die, motor mount, Motor Cap for Little Power Hammer by Chedator
Description
While making the "Little Power Hammer" By Chedator (https://www.thingiverse.com/thing:5776659) I had to make some tweaks these are the files I created. I had to completely recreate the die, it still came out a bit large but I printed it at 98% and just had to do a bit of shaving to get it to slide in. 97% might be spot on. I utilized a motor from Hobby Lobby which was slightly smaller than his. I created a new motor mount and cap. I opted not to use the cap in general, it didn't fit flush with what i had to work with. this one I also printed at 98% My printer clogged while on the motor mount and it was one of those days so I opted to just use a heat gun to soften and reshape his motor mount and it worked. I am still a bit noob-ish so don't expect design brilliance.
Statistics
Likes
0
Downloads
0