Pullsar Challenger GS 1x20 ARM Mount Dovetail
Description
This is mount / arm for Pulsar Challenger GS 1x20. This mount should interface with any dovetail NVG system, (Wilcox style). RIGHT eye version is TESTED by me, worked for several years without issues. It allows some adjustability, Hinge provides some IPD / height adjustments. When tightened, this hinge becomes practically solid. I flipped this mount for use on left eye also, but this modification is untested. It should work, as rail should be the same on both sides, just shorter rail on other side of NVG, but it is not 100% verified. If You print it and verify compatibility for left eye use or find any problem, please let me know. This mount must be printed with supports, so some cleanup of print is necessary to make the hinge fit and work as expected. Entire mount is quiet bulky, but plastic is not very heavy and Challenger is pretty big NVG, so I wanted sturdy solution and when in use, this mount should not be in a way. For printing / slicing use 3MF files, STLs are stupid and none should be using them these days. Hardware needed: M5x60 screw with round head and square shape under head. M5 nut ( normal is OK but can be locking as well ) Tripod screw that fits NVG I included STEP files for both R and L variant. If You want You can change it as you wish, just please share it back to Thingiverse, ideally again with STEP FILES attached! Disclaimer!: I am not responsible if you trip in the woods and smack your NVG to the ground and your face :D. !
Statistics
Likes
0
Downloads
0